The Upper Part Of The Scanned Image Appears Missing - Fujitsu FI-800R Operator's Manual

The Upper Part of the Scanned Image Appears Missing

Check the following points
● Did you set the paper size of the document to be scanned in the scanner driver? (page 136)
If the problem persists, refer to
(page 140) and take measures accordingly. If the problem still persists, check each item in
Contact the Scanner Service Provider (page 141)
purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.
●
Did you set the paper size of the document to be scanned in the scanner driver?
Solution
Set the paper size of the document to be scanned in the scanner driver, and then perform a scan.
If you use the return path opening and scan a document that is larger than the paper size set in the
scanner driver, the upper part of the scanned image will appear missing.
The First Measures to Take When You Encounter any Errors or Troubles
first, then contact the distributor/dealer where you
136
Troubleshooting
Before You