Scanning At High Altitude [High Altitude Mode] - Fujitsu FI-800R Operator's Manual

Scanning at High Altitude [High Altitude Mode]

Enable this mode to use the scanner at an altitude of 2,000 m or higher.
Low atmospheric pressure at high altitudes may lower the accuracy in detections for overlapped documents with the
ultrasonic sensor.
Setting [Enable] to on for High Altitude Mode improves the accuracy to detect overlapped documents.
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting 2] → [High Altitude Mode].
3
Select [Enable] to use the scanner at high altitude.
The factory default setting is [Disable].
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
144).
180