Quality Of Scanned Text Or Lines Is Unsatisfactory - Fujitsu FI-800R Operator's Manual

Quality of Scanned Text or Lines Is Unsatisfactory

Check the following points
● Are the glass and rollers inside the ADF clean? (page 122)
● Is the resolution appropriate? (page 122)
● Did you configure the settings in the scanner driver to scan in grayscale or color mode? (page 122)
Is there any foreign matter (such as dust or paper dust) on the document? (page 122)
●
If the problem persists, refer to
(page 140) and take measures accordingly. If the problem still persists, check each item in
Contact the Scanner Service Provider (page 141)
purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions
supplied with this product, and then make an inquiry.
●
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to
●
Is the resolution appropriate?
Solution
Specify a higher resolution in the scanner driver.
●
Did you configure the settings in the scanner driver to scan in grayscale or color mode?
Solution
Configure the settings in the scanner driver to scan in black & white mode.
When you scan in grayscale or in color mode, the scanned image may not become sharp and clear.
●
Is there any foreign matter (such as dust or paper dust) on the document?
Solution
Remove any foreign matter off the document.
Foreign matter may get on the glass that is inside the ADF, and cause the image to appear dirty.
The First Measures to Take When You Encounter any Errors or Troubles
Cleaning the Inside of the Scanner (ADF) with a Cloth (page
122
first, then contact the distributor/dealer where you
Troubleshooting
Before You
89).