Fujitsu FI-800R Operator's Manual page 131

●
Are the pad unit and pick roller clean?
Solution
Clean the pad unit and pick roller.
For details, refer to
●
Are the pad unit and pick roller worn out?
Solution
Start up the Software Operation Panel to check the counters for the pad unit and pick roller, and if
necessary, replace the pad unit and pick roller.
For details, refer to
For details about replacing the pad unit and pick roller, refer to
Replacing the Pick Roller (page
Cleaning the Inside of the Scanner (ADF) with a Cloth (page
Checking the Sheet Counters (page
99).
131
89).
162).
Replacing the Pad Unit (page 96)
Troubleshooting
and