Fujitsu FI-800R Operator's Manual page 67

2
Open the ADF paper chute (feeder) and pull out the chute extension.
For details, refer to Setting Up the ADF Paper Chute (Feeder) (page
3
Place the documents at the center of the ADF paper chute (feeder), and adjust the side guides to the
widest document in the batch.
ATTENTION
Load all documents covering the pick roller and the document loading detector. If documents are loaded
outside of the pick roller and the document loading detector, they may be fed skewed or not fed into the
ADF.
4
In the scanner driver, configure the scan settings to detect the paper size automatically.
31).
67
Various Ways to Scan