Analogue Output - Xylem MJK Oxix Installation And User Manual

Dissolved Oxygen Transmitter

Analogue Output

The analogue output is an active output with a maximum load of 800Ω.
The analogue output can be programmed for indication of primary units.
See details on page 53.
Digital Output
Oxix has two digital outputs - DO1 with an opto (light triggered) relay and
®
DO2 with an electro-mechanical relay.
They can both be programmed for the following functions:
- Sensor error
- High and low alarms
DO1 shares the common terminal (Com) with DI.
See also application examples in Appendix E. Digital Input/Output Connec-
tions on page 101.
GB Oxix Manual 1209
Analogue Output
Terminal
AO +
AO
-
Opto Relay
Terminal
DO1 Com Max. 50 V DC /120 mA
DO1 NO
Electro-mechanical relay
Terminal
DO2 Com
DO2 NO
27
Designation
4-20 mA
4-20 mA
Designation
Designation
Max. 50 V DC /1 A
FW: 841013-009, 846001-002, 841513-009