Xylem MJK Oxix Installation And User Manual page 90

Dissolved Oxygen Transmitter
2. Unscrew the four screws that hold the Display Unit.
3. Lift out the Display Unit and connect a USB mini A/B cable to the mini
USB female B connector on the rear of the front panel.
4. Connect the other end of the USB cable (max. 4.7 metres long) to the PC.
5. Select "File" in the menu bar and click "Mount USB".
If the connection is successful, a "Device Clock" window for PC and de-
vice time synchronisation is displayed (if PC and device clock were out of
sync.) along with a link status display (see below).
If the connection fails, fi rst remove the cable and then re-connect it.
GB Oxix Manual 1209 90
FW: 841013-009, 846001-002, 841513-009