Dissolved Oxygen Transmitter
1. Introduction
Thank you for choosing the MJK Oxix
have done our utmost to design and manufacture a quality transmitter that
satisfies your requirements:
• High performance optical sensor
• No calibration
• No spareparts needed in sensor's 10 year lifetime
• Air or water jet cleaning system is standard
• Measurements not affected by sunlight or dry environment
• Large, easy-to-read display with trend curve capability
• Multiple languages
• Built-in datalogger
• No moving parts, oxygen consumption or risk of poisoning
• Mounting accessories (optional)
The Oxix
transmitter is easy to install and put into service. However, read this
®
manual first to get familiar with the Oxix
The equipment must be handled and operated as instructed by the manufac-
turer, MJK Automation A/S to ensure stable operation and accurate measure-
ments.
You can always contact your local representative or the MJK hot lines for
advice and guidance:
• Europe
Tel.: +45 45 56 06 56
• Denmark
Tel.: +45 45 56 06 56
• Norway
Tel.: +47 69 20 60 70
• Holland
Tel.: +31 251 672171
• USA
Tel.: +1 847 482 8655
• Australia
Tel.: +61 3 9758 8533
Visit our web site at
other products and the people behind them.
Oxix
is a registered trademark of MJK Automation A/S, Denmark.
®
MJK Automation A/S is a Xylem Brand.
GB Oxix Manual 1209
www.mjk.com
to learn more about MJK Automation, our
Dissolved Oxygen Transmitter. We
®
transmitter and all its features.
®
E-mail: mjk@mjk.com
E-mail: mjk@mjk.dk
E-mail: mjk@mjk.no
E-mail: mjknl@mjk.com
E-mail: mjkusa@mjk.com
E-mail: ns@mjk.com
7
FW: 841013-009, 846001-002, 841513-009