Advertisement
Securely block machine when working on or under it to prevent injury in case of hydraulic
failure or inadvertent lowering by another person.
This pulverizer is designed to be mounted to tractors with a category II 3-point hitch. Clevis pins (with
1 1/8" dia.) are provided for attaching to the tractor's lower links. Fasten to upper tractor link securely
with a 1" pin.
When operating, keep support stand locked up in raised position. To park the pulverizer, lower it to a
level surface; then set and fix the support stand all the way down.
After the first 1 - 2 hours of use, check over all fasteners to insure that they remain tight. Periodic
checks should be made thereafter.
1098ev401
OPERATION
Page 6
5K804
Advertisement
