Cleaning The Document Glass Cover - Xerox 50 System Administration Manual

1
KEY POINT: Perform this procedure only if you
have a Document Glass Cover. Do not clean the
belt on the Duplex Automatic Document Feeder.
2
1
Lift the Document Glass Cover.
2
Slightly dampen a clean, lint-free cloth with a
small amount of Film Remover.
3
Wipe the underside of the Document Glass Cover
until it is clean and dry, as illustrated in Figure 4.
If Film Remover gets on the Document Glass,
perform the procedure for cleaning the Document
Glass.
4
Close the Document Glass Cover.
4
4
KEY POINT: Periodically inspect the Document
Glass Cover for foreign materials to keep the
surface clean at all times. Any white, foreign
substance on the surface of the cushion may
cause the copier/printer to incorrectly calculate the
actual document size or its position, which might
result in an unsatisfactory copy.
5
6
7
MAINTENANCE

Cleaning the Document Glass Cover

Document Glass Cover
4–4 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE
Figure 4: Cleaning the