Replacing The Developer Waste Container - Xerox 50 System Administration Manual

1
When a message is displayed to replace a
Developer Waste Container, also known as the
Trickle Bottle, follow the instructions provided on
this page in addition to those on the labels
surrounding the Developer Waste Container and
affixed to the copier/printer.
CAUTION:To prevent developer spillage, remove
2
the Developer Waste Container only when the
"Developer Waste Container is Full" message
appears on the Touch Screen.
1
Open the Front Door of the copier/printer.
2
Place a few sheets of paper on the floor under the
Developer Waste Container to catch any
developer that may spill.
3
Locate the Developer Waste container (area C in
Figure 18).
4
4
5
6
7
MAINTENANCE

Replacing the Developer Waste Container

Figure 18: Locating the old
Developer Waste Container
4–12 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE