Machine Set-Up - Xerox 50 System Administration Manual

1
Use these settings to limit the number of copy
sets, disable/enable the Power Saver mode
option, select desired display units, and enter
network information.
2
1
On the Tools screen, touch the Machine Set-up
button to display the Machine Set-up screen, as
illustrated in Figure 38.
2
Review the current settings for each item. To
change a setting, use the up and down arrows to
3
highlight the desired item and touch the Change
Settings button to display the detail screen.
3 Perform one of the following:
•
4
•
5
NOTE: If the Power Saver Default option is
disabled, the Power Save Timeout in Machine
Timouts will not be selectable.
6
7
TOOLS MODE

Machine Set-up

On the Copy Quantity Limit screen (Figure
39), use the numeric keypad to enter the
maximum number (1—999) of copies/sets
allowed.
On the Power Saver Default screen (Figure
40), touch either the Enabled or Disabled
button.
Figure 38: Machine Setup screen
Figure 39: Copy Quantity Limit screen
Figure 40: Power Saver Default screen
3–26 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE