Xerox 50 System Administration Manual page 90

4
Examine the output and perform one of the
following:
1
•
2
3
4
5
6
7
TOOLS MODE
Touch the Halftone Screen button to access
the Halftone Screen, as illustrated in
Figure 59.
Touch the appropriate setting and touch Save
to return to the Auto Screening Adjust screen.
The Halftone screen options affect specific
Original Types and Photo Types:
•
Halftone - 200 line screen (a rotated line
screen) calibration affects the following
modes:
Original Type
Photo & Text
Photo & Text Xerographic Copy
Photo
Photo Xerographic Copy
Table 3: Halftone - 200 line screen
•
Photograph - 200 dpi (a clustered dot
screen) calibration affects the following
modes:
Original Type
Photo & Text
Photo
Table 4: Photograph - 200 dpi
•
Printer use - 150 dpi is used when Auto
Screening Adjust is applied to Copies only.
The Document Center ColorSeries 50 has
its own calibration procedure. Refer to the
Document Center ColorSeries 50 Printer
User Guide for more information about
calibrating the printer.
Photo Type
Halftone
Halftone
Photo Type
Photograph
Photograph
3–36 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE
Figure 59: Halftone screen