Supply Replacement; Replacing The Dry Ink Cartridge - Xerox 50 System Administration Manual

Supply replacement

Replacing the Dry Ink Cartridge

When a message is displayed to replace a Dry Ink
Cartridge (Figure 5), follow the instructions
provided here in addition to those on the labels
surrounding the cartridges and affixed to the
copier/printer.
CAUTION:To prevent dry ink spillage, remove the
Dry Ink Cartridge only when the "Cartridge is
Empty" message appears on the Touch Screen.
NOTE: The Dry Ink "Please replace dry ink"
message indicates the consumable should be
replaced. When this message is displayed on a
machine used primarily for general office or text
documents, fewer than 1500 copies can usually
be made prior to replacement. When the message
is displayed on a machine used primarily for
graphics, fewer than 1000 copies can be made
prior to replacement.
NOTE: When a Dry Ink low condition is displayed
on the screen, the color that is low will be shown.
If additional Dry Ink low conditions occur, a more
generic message is displayed on the screen. To
determine which Dry Ink cartridges should be
replaced, access Administration mode and select
the Consumables button.
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 4–5
Figure 5: Add Dry Ink message
1
2
4
4
5
6
7
MAINTENANCE