Audio Tones - Xerox 50 System Administration Manual

1
You can change the Audio Tones settings for the
following options:
•
•
•
2
•
•
•
You can turn the Control Panel Input Tone on or
off. For all other options, you can turn the tone off
3
or set its volume to soft, normal or loud.
1
On the Tools screen, touch the Audio Tones
button to display the Audio Tones screen, as
4
illustrated in Figure 45.
2
Review the current settings for each tone. To
change a setting, use the up and down arrows to
highlight the desired tone and touch the Change
5
Settings button to display the detail screen.
6
7
TOOLS MODE

Audio Tones

Selection Tone
Conflict Tone
Control Panel Input Tone
Machine Ready Tone
End of Job Tone
Fault Tone
Figure 45: Audio Tones screen
3–28 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE