7
Place the used Developer Waste Container in a
plastic bag, as illustrated in Figure 22, and
1
dispose of it according to local regulations.
2
8
Remove the new Developer Ink Waste Container
from the box and bag, as illustrated in Figure 23.
4
4
9
Align the new Developer Waste Container with the
arrow on the copier/printer, then slide the
Developer Waste Container into the copier/printer,
as illustrated in Figure 24.
10
Close the Front Door of the copier/printer.
5
11
Remove the sheets of paper on the floor under the
Developer Waste Container and dispose of the
sheets according to local regulations.
6
7
MAINTENANCE
Figure 22: Disposing of the used
Developer Waste Container
Figure 23: Removing the new
Figure 24: Inserting the new
Developer Waste Container
4–14
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE
container from the bag