Multiple-Up; 4 & 8 Pages Up; Page Up, - Xerox 50 System Administration Manual

Multiple-Up

The Multiple-Up feature (Figure 35) enables you
to specify whether 1, 2, 4, or 8 images from
multiple originals are copied onto a single page.
Each image is centered in its space.
If you select 2 Pages Up, use the 2 Pages Up
Copy Layout feature described below.
If you select 4 Pages Up or 8 Pages Up, use the 4
& 8 Pages Up Copy Layout feature described
below.
NOTE: Refer to the User Guide for additional
information on the Multiple Up feature.
2 Pages Up
This option (Figure 36) allows you to specify how
two images will be placed on a single sheet of
paper:
•
Left-to-right / top-to-bottom
•
Right-to-left / top-to-bottom
4 & 8 Pages Up
This option allows you to specify how four or eight
images will be placed on a single sheet of paper,
as illustrated in Figure 37:
•
Horizontally, beginning from upper left corner
•
Horizontally, beginning from upper right corner
•
Vertically, beginning from upper left corner
•
Vertically, beginning from upper right corner
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 3–25
Figure 35: Multiple-Up Default screen
Figure 36: 2 Pages Up Default screen
Figure 37: 4 Pages Up Default screen
1
2
3
4
5
6
7
TOOLS MODE