Xerox 50 System Administration Manual page 116

4
Grasp the Paper Path Module and firmly pull the
module out of the copier/printer until it is fully
1
open, as illustrated in Figure 26.
2
5
Locate the Fuser Oil Cartridge in the front of the
Paper Path Module (area D).
6
Lift the Fuser Oil Cartridge straight up off the
module, as illustrated in Figure 27. Hold it steady
in this position until any excess oil has dripped off
the cartridge and into the fuser oil reservoir. Hold a
sheet of paper under the bottle nozzle to catch
any drips while removing the cartridge from the
machine.
4
4
5
6
7
MAINTENANCE
Figure 26: Pulling out the Paper Path Module
Figure 27: Removing the old
4–16 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE
D
Fuser Oil Cartridge (D)