Sensor Properties In Head Transmitters - JUMO digiLine CR Operating Manual

Intelligent electronics with rs485 interface for connecting conductive conductivity sensors to jumo digiline systems
Table of Contents

Advertisement

14 Technical data
14.7

Sensor properties in head transmitters

The technical data for each of the sensors for the individual device versions, which are combined with
the head transmitter, must be obtained from their data sheets. The relevant sensor types for the individ-
ual device versions of the JUMO digiLine CR can be obtained from the following table.
JUMO digiLine CR device versions
202764
202765
CAUTION!
In the case of head transmitters, heat emitted from the system can exceed the admissible tem-
perature of the head transmitter.
Make sure that the head transmitter used is operated within the limits of its technical data.
 Observe the specifications on the data sheet! It may be necessary to select a device version with a
separate sensor and mount the transmitter at an adequate distance from the heat source.
70
Sensor data sheet
202923
202924 (data for sensor 202924/10 are relevant)

Advertisement

Table of Contents
loading

This manual is also suitable for:

202764202765

Table of Contents