Table of Contents
Advertisement
6
Electrical connection
6.1
Installation notes
CAUTION!
Disconnecting the JUMO digiLine bus line and/or removing the terminating resistors and termi-
nating connectors during operation will disrupt the digiLine bus.
Possible consequences include bus disruptions with loss of the measured values from the sensor on the
bus affected.
Before the bus cabling is changed, it is necessary to take measures that ensure safe operation of
the system if sensors fail on the JUMO digiLine bus.
CAUTION!
The JUMO digiLine and IO-Link systems operate with different voltages and connection assign-
ments on the M12 sockets for the interface connection.
If a device is connected to an interface not intended for it, the device may be damaged.
Make sure that devices are connected only to interface types for which they are intended!
6 Electrical connection
33
Advertisement
Table of Contents
