Mounting Of Head Transmitters - JUMO digiLine CR Operating Manual

5 Mounting
Pipe mounting
When used in conjunction with cable ties, the mounting plate allows mounting of the device on horizontal
and vertical pipes or masts.
(1) JUMO digiLine CR
(2) Mounting plate from the scope of delivery of the JUMO digiLine CR with installed cable ties
(3) Pipe/mast (at customer's site); cable ties are not included in the scope of delivery of the device.
5.4

Mounting of head transmitters

JUMO digiLineCRHead transmitters are installed in suitable fittings, process connections or holders that
accommodate the corresponding sensor type for your device. Given the variety of different sensor types
available in conjunction with the JUMO digiLineCRas head transmitter, there is a corresponding variety
of mounting possibilities. Please refer to the operating manual for the specific conductivity sensor to
mount the various sensor types. You can determine the sensor type for your device from the order code
on the nameplate and the order details in this operating manual. The operating manuals for the sensor
type appropriate for your device can be found on the JUMO website using the product group number in
the order details.
 chapter 4 "Identifying the device version", page 17
32
(3)
(1)
(2)