Table of Contents
Advertisement
7 Operation
In device versions without a display, the flashing green status LED indicates that the device is operating
and there are no errors.
7.2
Device menu
The device menu is opened from the measuring mode by pressing the "OK" operating key. The sub-
menus listed in the following table are available here.
Submenu
Log-on/Log-out
Calibration
Device informa-
tion
Service
To navigate through the menu hierarchy, use the "Up" and "Down" operating keys to move the cursor to
the submenu you wish to open. You can recognize the position of the cursor by the inverted appearance
of the highlighted menu entry. Pressing the "OK" operating key opens the submenu marked by the cur-
sor. Arrow symbols (pointed brackets) at the end of the line after menu entries indicate that additional
submenus are available. If the number of menu entries in a menu exceeds the number of display lines,
a scroll bar appears at the right edge of the display.
42
Explanation
The user logs on and out here. In addition, passwords can be changed here.
chapter 7.2.1 "Log-on/Log-out", page 43
Functions for calibrating the JUMO digiLineCRwith the currently connected sensor
chapter 7.2.2 "Calibration", page 43
Information on device hardware and software.
chapter 7.2.3 "Device information", page 44
Functions and information on diagnosis and maintenance of the device hardware
chapter 7.2.4 "Service", page 44
Advertisement
Table of Contents
