Table of Contents
Advertisement
7 Operation
7.2.3
Device information
In device versions with a display, the "Device info" submenu is available for checking and diagnosis pur-
poses. Information on the device hardware and software is shown here:
•
Version: Version information on device hardware and software
•
Device version: Description of your device version
•
Sensor tag: ID for assigning JUMO digiLine electronics to a specific input for digital sensors of a
specific master (JUMO AQUIS touch S/P) in your system. Linking of the JUMO digiLine electronics
requires that the sensor tag of the input and JUMO digiLine electronics match. The sensor tag is es-
tablished by the user.
chapter 11.2 "Sensor data", page 55.
•
Sensor origin: This entry gives information about the JUMO digiLine master with which the JUMO
digiLine electronics were last used.
chapter 11.2 "Sensor data", page 55
7.2.4
Service
Maintenance functions and functions for setting the device hardware are found in the "Service" menu:
•
Contrast: Sets the display contrast in 10 steps - adjustable by means of the "Up" and "Down" oper-
ating keys
44
Advertisement
Table of Contents
