Dakota Digital HDX-64P-GTO Instrument Installation

For 1964-67 gto / lemans / temptest

Download this manual

Your new HDX-64P-GTO kit includes:

Universal Sender

Pack

Installation

1. Remove the stock gauge cluster from the dash and save all hardware for reassembly.

HDX-64P-GTO

Dakota Digital HDX Instrument Installation

For 1964-'67 GTO/Lemans/Temptest

Buzzer

Installation Manuals

Main Harness

HDX Display

Control Box

(3) Block Off

Lenses

(3) 1/2" Pan Head Screws

(3) 1/2" Flat Head Screws

Manual # 650597A

Page 1 HDX-64P-GTO Dakota Digital HDX Instrument Installation For 1964-’67 GTO/Lemans/Temptest Your new HDX-64P-GTO kit includes: HDX Display (3) Block Off Lenses Buzzer Universal Sender Pack Installation Manuals (3) 1/2" Pan Head Screws (3) 1/2" Flat Head Screws Control Box Main Harness Installation 1.
Page 2 2. Remove the stock gauges, separator plate, and lens from the bezel. The only item to be reused is the original front bezel; the other pieces can be discarded. Now is a good time to clean or refinish the bezel. 3.
Page 3 5. Connect the provided Main Harness and the Buzzer (optional for audio feedback) to the back of the HDX system. Buzzer Connector 6. Re-install the cluster into the vehicle using stock hardware and refer to the main manual for wiring instructions to complete the HDX installation. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.