Otto Bock Avantgarde T Instructions For Use Manual page 101

Seat heights — Avantgarde XXL 2
Anterior seat height — Avantgarde XXL (in cm)
Posterior seat height — Avantgarde XXL (in cm)
The axle can be adjusted horizontally between the front and rear axle position in 7 different positions
InfORMATIOn
(A through G). Position A allows a passive centre of gravity, whilst in position G, the most active centre of gravity
is reached. Unless otherwise specified, the rear wheel position will have the standard setting of D/4.
1) Measured at 0° seat angle, without seat cushion.
Avantgarde T, Ti8�9, TiUltra, VR, XXL 2
1)
Position
Position 4
Position 3
Short caster fork
Position 2
Position 1
Position 4
Position 3
Long caster fork
Position 2
Position 1
The anterior seat height and posterior seat height are depend-
InfORMATIOn
ent on the chosen wheel size and mounting position. Please refer to the
seat height table!
Seat inclination: 10 cm maximal seat height difference between
InfORMATIOn
anterior seat height and posterior seat height (equaling a seat inclination
of about 15°).
Without indication of the desired seat inclination, it will be fac-
InfORMATIOn
tory-set at approx. 4°.
1)
Caster diameter
140 mm
45
47
47
48
49.5
50.5
Mounting
positions
24"
1 40
2 42.5
3 44.5
4 47
5 49
6 51
The posterior seat height is dependent
InfORMATIOn
on the chosen wheel size and mounting position in
the rear wheel attachment device. Please refer to
the seat height table!
9�1 Technical data
7" 8"
49
49
50 51
51.5 52.5
52.5 53.5
Posterior seat height
26"
42
44.5
46.5
49
51
53
Ottobock | 101