Installing The Application Software; S7-1500 Application Software - Siemens SIMATIC S5 Manual

2 Engineering
2.1.3

Installing the application software

Prerequisites
SIMATIC S5 station:
Programming device with
•
STEP 5 V7.2
•
SINEC NCM COM 1430 TCP V 2.07
•
Operating system: Windows XP SP3
SIMATIC S7 station:
•
Programming device with TIA Portal
•
Operating system: Windows 7
The required SIMATIC S5 software can only be installed with the Windows XP
Note
operating system.
2.1.4

S7-1500 application software

Overview of example scenarios in S7-1500 stations
The example project in the S7-1500 is structured in such a way that an own S7
station is available for all example scenarios described in chapter
only this communication variant in connection with the CP1430 TCP.
Table 2-4
Scen.
1 PLC_Sz1_F-W_S5-CP1430TCP
2a PLC_Sz2_S-R_CPU_ID5_ID105
2b
3 PLC_Sz3_S-R_CP_TRCV_C_ID7
4a PLC_Sz4_S-R_CP_ID4_ID104
4b
5 PLC_Sz5_SR_CPU_TSEND_C_ID6
Ethernet Communication (ISO on TCP) between SIMATIC S5 and
SIMATIC S7-1500 Controllers
Entry-ID: 109482475, V1.2,
Station name
07/2019
2 demonstrating
Description
Communication via FETCH/WRITE and
CP1543-1
Communication via programmed Open User
Communication (single instructions) and
internal CPU interface
Communication via parameterized Open User
Communication (single instructions) and
internal CPU interface
Communication via programmed Open User
Communication (compact instructions) and
CP1543-1
Communication via programmed Open User
Communication (single instructions) and
CP1543-1
Communication via parameterized Open User
Communication (single instructions) and
CP1543-1
Communication via programmed Open User
Communication (compact instructions) and
internal CPU interface
15