2 Engineering
2.1.1
Installing the hardware for the S7-1500 station
For setting up the hardware, please proceed according to the following table:
No.
1.
PC/PG
2.
Install the S7-1500
power supply
3.
S7 CPU1516-3 PN
4.
CPU 1543-1
5.
I/O modules
2.1.2
Installing the hardware for the SIMATIC S5 station
For setting up the hardware, please proceed according to the following table:
Table 2-3
No.
1.
PC/PG
2.
Power supply PS 7A/15A
3.
S5-CPU944
4.
S5 CP1430 TCP
Ethernet Communication (ISO on TCP) between SIMATIC S5 and
SIMATIC S7-1500 Controllers
Entry-ID: 109482475,
V1.2,
Action
•
•
•
•
•
•
•
•
•
Action
07/2019
Remark
Connect the PC/PG to the SCALANCE switch via a
standard Ethernet cable (RJ 45).
Connect the power module to the power grid (220 /
230 V AC).
The SIMATIC S7 PM module supplies all modules
required for the S7-1500 station.
Expand the S7-1500 CPU 1516 with the PM module
via backplane bus connectors.
Connect the Ethernet port X1 (RJ 45) to a port of the
SCALANCE switch.
Connect the CP1543-1 to the CPU 1516-3PN via a
backplane bus connector.
Connect the Ethernet port X1 (RJ 45) of the CP to
the SCALANCE switch via a standard Ethernet
cable (RJ 45).
Connect the I/O modules to the CP1543-1 via
backplane bus connectors.
Use an external 24V DC power supply to supply the
I/O modules with power.
Remark
•
Connect the PC/PG with STEP 5 being
installed to the SIMATIC S5 (CPU 944
and/or CP1430TCP) via the serial interface
and the PG-AG cable.
•
Plug the power supply PS 7A/15A into the
backplane bus UR 1 of the SIMATIC S5
and connect it to the power grid (220 / 230
V AC).
•
Plug RAM modules into the CPU 944 and
the CPU into the S5 backplane bus UR1 at
the CPU slot.
•
Plug the CP1430 TCP into the S5
backplane bus UR 1 via an adaptation
capsule. Plug a RAM module into the
CP1430 TCP.
•
Connect the 15-pin Ethernet connection of
the CP1430 TCP to the SCALANCE switch
via a TP cord cable (15-pin/RJ45).
14