Installing The Software; Installing Step 7-Micro/Win For Getting Started - Beginners - Siemens SIMATIC S7-200 Manual

Installing the software

2.1

Installing STEP 7-Micro/WIN for Getting Started - Beginners

In order to install the STEP 7-Micro/WIN V4 programming software you need a PC or
programming device (PG) with a Microsoft Operating System. The software will run on
Windows 2000 Service Pack 3 or later, Windows XP Home, or Windows XP Professional.
1. Insert the CD into your PC or PG that has Microsoft Operating System running.
2. Select the installation.
3. Start the installation wizard and follow the instructions.
Note: If you have a previous version of STEP 7-Micro/WIN installed, you will be prompted to
remove the old software and reboot your system. After the old software is removed, open
and close the CD drive to restart the installation process.
At the end of the installation, the entry, "STEP 7-Micro/WIN" appears in the Windows Start
menu, Start > SIMATIC.
Getting Started - Beginners
Training Documents, 07/2007, A5E01031470B
1.
3.
2.
2
13