Siemens SIMATIC S5 Manual page 13

2 Engineering
Hardware setup
The figure below shows the complete hardware setup of the example.
SIMATIC S7-1500 station
230 V AC
The following table includes the overview of all IP addresses used in this example
for the SIMATIC S7-1500 and the SIMATIC S5. A fixed configuration of the IP
addresses is required.
The subnet mask is 255.255.0.0 in all network components.
Table 2-2
Device
SIMATIC S7
CPU1516 -3PN
CP1543-1
SIMATIC S5
CP1430 TCP
PG/PC (WinXP/STEP5)
PG/PC (TIA Portal)
Note In general, the installation guidelines of all components have to be observed.
Please observe the installation and connection guidelines from the
corresponding manuals of the components used.
Ethernet Communication (ISO on TCP) between SIMATIC S5 and
SIMATIC S7-1500 Controllers
Entry-ID: 109482475, V1.2,
Scalance
X208
140.140.111.102 (port X1)
140.140.111.103 (port X1)
140.140.111.104
PG/PC
140.140.111.100
140.140.111.101
07/2019
SIMATIC S5-115U station
230 V AC
24 V DC
OUC: Open User Communication
IP address
Engineering stations
PG
STEP 5
NCM COM 1430TCP
PG
RS232/TTY TIA Portal
STEP 7 V 13
Industrial Ethernet
Designation
SIMATIC S7-1500 CPU
SIMATIC S7 CP1543-1
SIMATIC S5 CP1430 TCP
Programming device with
STEP5 and NCM COM
1430TCP
Programming device with
TIA Portal
13