Installation And Commissioning; Installing The Software; Installing The Hardware; Installation Under Laboratory Conditions - Siemens S7 Series Communication Instruction Manual

5 Installation and Commissioning

Installation and Commissioning
5
This chapter describes the steps necessary to start up the example.
Note Always follow the below installation guidelines:

"S7 1200 Programmable Controller" System Manual
-

Gateway manual
5.1

Installing the software

Install the latest version (V14 or higher) of STEP 7 (TIA Portal) on your computer.
No additional software is needed for configuring the "Triple-X PROFINET+KNX"
universal gateway. It is configured using the integrated web server.
5.2

Installing the hardware

5.2.1

Installation under laboratory conditions

For the function test of this application under laboratory conditions, the following
installation using a switch is suitable. It allows you to simultaneously execute all of
the below functions (see the following advantages) with a single PG/PC.
Figure 5-1: Installation under "laboratory conditions"
PROFINET 1 / 2
IP: 192.168.0.2
"Triple-X PROFINET + KNX"
universal gateway
+ -
USB
interface
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689, V1.0,
24V DC
RS 232/485
LAN
IP: 192.168.0.3
KNX
+ -
LAN
KNX
+ - + -
KNX
KNX
KNX
room control
power supply
wall switch
unit
L N PE
230 V AC
USB
Sonstige / Inaktiv
06/2017
24V DC 24V DC
CSM / switch S7-1200 CPU
IP: 192.168.0.1
PN PN
PROFINET IE
+ -
IP: 192.168.0.100
PG/PC
27