Table of Contents
Advertisement
if you edit the interpretation, the data will not be saved unless the record is confirmed
at the MAC 5500. The record is transmitted to the MUSE system as a confirmed
record as well.
Do I have to enter all the data on the Patient Data screen?
In System Setup > Basic System > Patient Questions you can require that the patient
identification number, or medical record number, be entered. It is not a requirement to
enter any other data. However, we recommend that you enter the patient name and
identification number, at the least. If you are transmitting to the MUSE system, you will
want to enter the Location number as well. If an emergency situation dictates that
you must complete the test without entering the patient data, make sure you edit the
record to add the missing information before you transmit it to the MUSE system.
Transmission
The following FAQ relates to transmitting records to the MUSE system.
For more detailed information about this question, refer to the operator's manual.
Input and Output Connectors
The following sections detail the input/output signals for system connectors. The
pin-by-pin descriptions identify the signal names and pin outs for each connector on
the unit.
A Pins (J1)
A Pins (J1)
Pin
1
2
3
4
5
6
2046275-019H
Names
Diagram
Data
NC
Ground
+5V
Clock
NC
MAC™ 3500
Troubleshooting
61
Hide quick links:
Advertisement
Table of Contents
