Table of Contents
Advertisement
30
Eyeball Replacement
To replace the eyeball assembly
1.
Rotate the eyeball, and align it to the slots in the lens
opening.
2.
Pull the eyeball out of the lens.
3.
Insert the alternate size eyeball perpendicular, into the
slots in the lens opening.
4.
Rotate and center the eyeball into the lens.
COLORVISION
The flexible nozzle is recommended in cases where the plume from the ColorVision
Light tends to swirl around. The swirling effect is usually caused by a wave action in the
body of water. This flexible nozzle is designed to protect the jet water as it reaches the
surface and protects it from the wave action.
Light Extension Nozzle Installation
To install the extension nozzle:
1.
Insert the ¾" eyeball into the lens as described in "Eyeball Replacement"
above.
2.
Pull the rubber nozzle through the eyeball opening until it locks in place.
COLORVISION Light Installation and User's Guide
Eyeball
™
LIGHT EXTENDED NOZZLE
INSTALLATION INSTRUCTIONS
Insert nozzle from
underside of lens.
Hide quick links:
Advertisement
Table of Contents
