Important Warning And Safety Instructions - Pentair COLORVISION Installation And User Manual

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

residential pools and spas. It is important to comply with these codes, many of which
directly regulate the installation and use of this product. Consult your local building and
health codes for more information.
IMPORTANT NOTICE
Guide ("Guide") contains important information about the installation, operation
and safe use of this underwater pool and spa light. This Guide should be given
to the owner and/or operator of this equipment.
instructions can result in severe injury, death, or property damage.
Call (800) 831-7133 for additional free copies of these instructions. Please refer to www.
pentairpool.com for more information related to this products.
This underwater light must be installed by a licensed or certified electrician or a
qualified pool professional in accordance with the current National Electrical Code
(NEC), NFPA 70 or the Canadian Electrical Code (CEC), CSA C22.1. All applicable
local installation codes and ordinances must also be adhered to. Improper
installation will create an electrical hazard which could result in death or serious
injury to pool users, installers or others due to electrical shock, and may also cause
damage to power source. Always disconnect the power to the pool light at the
circuit breaker before servicing the light. Failure to do so could result in death or
serious injury to serviceman, pool users or others due to electrical shock.
SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS LIGHT
IS NOT INSTALLED AND USED CORRECTLY.
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST
READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE
USING THE POOL AND/OR SPA LIGHT.
Most states and local codes regulate the construction, installation,
and operation of public pools and spas, and the construction of
Before installing this product, read and follow all warning notices
and instructions in this Guide. Failure to follow warnings and
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION:
UNDERWATER POOL LIGHTS REQUIRE HIGH VOLTAGE
WHICH CAN SHOCK, BURN, OR CAUSE DEATH.
Before working on or servicing pool lights, always disconnect
power to the pool and/or spa lights at the source circuit
breaker from the light before servicing the light. Failure to do
so could result in death or serious injury to service person,
pool users or others due to electric shock. When installing
and using this electrical equipment, basic safety precautions
should always be followed, include the following:
- Attention Installer: This Installation and User's
COLORVISION Light Installation and User's Guide
III