Pentair COLORVISION Installation And User Manual page 18

14
11. Install the desired eyeball fitting included into the lens (See Eyeball
Instructions on page 29) by Inserting the eyeball perpendicular into the
eyeball housing opening and rotating to center the eyeball into the eyeball
housing. Be sure it is pressed all the way down to provide a smooth
transition. Adjust the eyeball for proper water direction.
12. Before operating the ColorVision™ light, fill the pool with water until the
light is completely submerged. Note: The ColorVision light should not
be powered for more than 30 seconds if not submersed in water.
13. Final check for proper ColorVision light operation: Switch on the main
switch or circuit breaker to the 12 VAC transformer and the switch that
operates the GloBrite light itself. The light should illuminate when the 12
VAC power is applied. If not recheck the installation steps
COLORVISION Light Installation and User's Guide
Eyeball