Pentair COLORVISION Installation And User Manual page 29

Set up a ColorVision
To setup an AUX circuit to control the ColorVision Light, assign the circuit light function an
auxiliary relay circuit (AUX 1), then assign the circuit name for that light circuit. The light
circuit name will appear on the main screen. Each ColorVision light must also be assigned
a circuit function. To assign a Circuit Name for the ColorVision light, go to: MENU >
SETUP > ADVANCED > CIRCUIT FUNCTIONS
Setup a ColorVision light function circuit: Assign each light auxiliary relay circuit a
circuit name, then assign that light relay circuit in the "CIRCUIT FUNCTIONS" section,
as "INTELLIBRITE." To setup the ColorVision light circuit function (use the "IntelliBrite"
circuit name):
1. Press the button next to the AUX button (the relay auxiliary circuit
connected to the ColorVision (IntelliBrite) light).
2. Press the right or left side (PREV/NEXT) button next to "INTELLIBRITE."
Scroll through the circuit functions until "INTELLIBRITE" is displayed.
3. Press the SAVE button on the bottom of the screen. Press the EXIT button to
return to the main screen.
Assign the ColorVision light circuit to the Lights screen:
4. Press the Lights button on the bottom of the screen.
5. Press the right side button next to "CONFIGURE."
6. Press the button next to "NONE" to assign an IntelliBrite light circuit to the
selected button. Light names can be setup to display on the left side for
"Spa" features and on the right side for the "Pool" features.
7. Press the top left or right side button to scroll through the available light
circuits which can be used for the ColorVision (IntelliBrite) lighting features.
Select at the circuit name you wish to use. The displayed circuit names are
circuit names that were previously assigned when assigning a circuit
function.
Operating and Selecting ColorVision (IntelliBrite) Color Modes
From the "Modes" screen you can select various preset show color lighting effects,
such as "American mode" and "Sunset mode," and SAm Style (an emulation of the
SAm color scheme). Using the "Hold" and "Recall" feature you can also capture and
save a unique color effect to recall at a later time.
Modes screen: To access the IntelliBrite color show "Modes" features from the Lights
screen, press the Lights button on the bottom of the screen, then press the left side
button next to "MODES."
Special Light Features: Up to twelve (12) IntelliBrite light circuits can be displayed on
the main Lights screen (special light features). From the Lights screen you can activate
the IntelliBrite lighting features (i.e., color swim, color set). Assuming each ColorVision
(IntelliBrite) light has its own relay and separate circuit.
™
Light Circuit Function
COLORVISION Light Installation and User's Guide
25