18
12. Install an O-ring on the lens and install the lens over the top of the niche
using the supplier machine screws. Secure the lens with the eight (8) 8-32
x 1/2" machine screws (provided), see Figure 1 on page 6. Using a No. 2
Philips head screwdriver, tighten each retaining screw to a torque value
of 10.00 (minimum) to 15.0 (maximum) in-lbs to secure the lens on the
niche. DO NOT OVER TIGHTEN THE SCREWS. DO NOT ASSEMBLE
WITH POWER TOOLS. Over tightening or using a motorized screwdriver
on the lens screws can over torque the screw threads and damage the
niche housing and/or lens.
Machine screws
(QTY. 8 - provided)
Lens
O-Ring
13. Install the lens screw cover ring on the lens and twist to lock in place.
Lens cover ring
Rotate lens cover
ring clockwise to
lock in place
COLORVISION Light Installation and User's Guide