Table of Contents
Advertisement
STEP 5
•
Put the two handle tubes (23) together with the handle connecting piece (1) in the middle and
secure using one M6x50 bolt (32), Ø6 flat washer (43) and M6 lock nut (24). Hand tighten.
•
Put the handle tubes over the post and attach the gauge plate assembly (4) using an M6x50 (32)
and M6 lock nut (24). Hand tighten.
STEP 6
•
Attach the hopper (16) and deflector assembly to the main frame using an M6x45 bolt (11),
Ø6 flat washer (13) and M6 lock nut (24). Hand tighten.
NOTE: If the gears do not match, loosen the bottom two bolts on the gear plate and adjust.
Advertisement
Table of Contents
