The Handy THSS100 Instruction Manual page 5

labels.
CRUSH AND CUT HAZARDS
Always keep your hands and feet clear from
moving parts while operating the equipment.
Always keep the work area clean and clear
when operating.
CONDITIONS
We recommend the machine is not used
during winds. This may affect the spreading
pattern.
DRESS PROPERLY
Do not wear loose clothing, gloves, scarfs,
neckties or jewelry (rings, wrist watches),
which can be caught in moving parts.
DO NOT OVERREACH
Keep proper footing and balance at all times
when using the machine. Never stand on the
machine. Serious injury could occur if the
machine is tipped or if the moving parts are
unintentionally contacted. Do not store
anything above or near the machine, where
anyone might stand on the machine to reach
them.
AVOID INJURY FROM UNEXPECTED
ACCIDENT
Keep hands & feet out of the way of all
moving parts. Do not place any part of your
body or any tool e.g. in moving parts of the
machine during operation.
DO NOT FORCE TOOL
Always work within the rated capacity. Do not
operate for a purpose for which it was not
intended.
MAINTAIN YOUR MACHINE WITH CARE
Clean the machine immediately after use.
Keep the machine clean to ensure it operates
to its full & safest performance. When
maintaining this machine, only the
manufacturer's original replacement parts
should be used. The use of non-original
manufacturer parts may invalidate your
warranty.
PROTECT THE ENVIRONMENT
Take left over materials to an authorised
collection point or follow the stipulations in
the country where the machine is used. Do
not discharge into drains, soil or water.
STORE IDLE EQUIPMENT
When not in use, the machine should be
stored in a dry location. Keep the machine
away from children and others not qualified
to use it.
OPERATION SPEED
Do not exceed 6mph, to avoid personal injury
and/or equipment damage.
TYRE INFLATION
Before operating, make sure the tyres have
the recommended pressure of 25 PSI (Do not
exceed 25 PSI). We recommend the use of
FOOT or HAND inflation devices only.
This is a garden/domestic product, therefore
extended use over abrasive surfaces (e.g.
concrete, tarmac etc.) could cause premature
wear on the tyres.
SAFETY SYMBOLS
Safety alert symbol. Used to alert you to
potential personal injury hazards. Obey all
safety messages that follow this symbol to
avoid possible injury.
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in serious
injury.
WARNING
Indicates a potentially hazardous situation
which, if not avoided, could result in serious
injury
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
CAUTION
Used without the safety alert symbol indicates
a potentially hazardous situation which, if not
avoided, may result in property damage.