The Handy THSS100 Instruction Manual page 8

STEP 3
•
On the left side of the axle insert the wheel bushing (35), wheel (36), Ø16 flat washer (34) and
secure with the Ø5x35 cotter pin (71).
•
Insert the wheel bushing (35), wheel (36) on the right side and secure using the M6x60 bolt (70)
and M6 lock nut (24).
NOTE: If needed use the extra flat washers (34) to decrease the gap between the wheels.
STEP 4
•
Attach the handle tube (26) and pivot bracket assembly (19) to the main frame assembly using
an M6X55 bolt (50) and an M6 lock nut (24).