(1) Lower Link
5. Install the lower link to the imple-
ment and fit the pins.
M55-유럽판-06.indd 3
H11O566A
(1) Lower Link end
6. start the engine and drive back-
ward toward the implement. then,
the lower link end is inserted to its
original position.
3-poInt HItcH ImpLement And LoAdeR opeRAtIon
H11O569A
(1) top Link
(2) Lock pin
7. separate the top link from its
bracket and turn it to adjust its
length so that it becomes close to
the upper bracket mounting hole
of the implement. then, fit it to
the mounting hole, insert the lock
pins, and fix it with the snap pin.
Remove the implement support as
necessary.
6
-
H11O561A
(3) snap pin
6
2011-08-11 오후 3:47:36