11
Disposal
11.1
Disposal consideration
ELDRO-Assembly-manual-344029-EN.docx
WARNING
Opening the ELDRO
Risk of injury due to tensioned c springs.
– Only service partners authorised by the manufacturer are
permitted to dismantle the ELDRO
manufacturer's factory.
The manufacturer can dispose of ELDRO
accordance with the applicable terms and conditions after they have
been dismantled properly.
When disposing of the ELDRO
observe the following points:
Observe national regulations on site.
Observe company-specific requirements.
Dispose of the operating fluid (oil filling), the plastic parts and the
metal parts separately.
Used process media must be disposed of in accordance with the
respective valid safety data sheets.
Disposal consideration 11.1
®
thrusters
®
thrusters outside the
®
thrusters for a charge in
®
thrusters and their process media,
Disposal
11
79 / 83