Assembly And Installation; Assembly - EMG ELDRO Ed 12/4 Assembly Manual

6

Assembly and installation

6.1

Assembly

6 Assembly and installation
6.1 Assembly
52 / 83
The following safety regulations must be adhered to before beginning
any work on ELDRO
 Ensure that the industrial system is shut down
 De-energise the system
 Safeguard the system to prevent it being switched on again
 Test to ensure a de-energised state
 Earth and short-circuit
 Cover or isolate adjacent live parts
®
The ELDRO thruster may only be assembled by specialists (e.g.
industrial mechanics/electricians) with many years of experience.
WARNING
Cylinder movements
Risk of crushing between surrounding hindrances and the cylinder
or connected components.
– When assembling, ensure sufficient free space to prevent
crushing.
– Take alternative measures to safeguard this hazard point.
CAUTION
®
The ELDRO thrusters weigh between 10 and 70 kg
Risk of injury when lifting the load manually.
– Use suitable lifting equipment (e.g. crane).
– Never remain below suspended loads.
– Use a transport aid (e.g. lifting carriage) with sufficient load
bearing capacity.
®
thrusters:
ELDRO-Assembly-manual-344029-EN.docx