6
Assembly and installation
6.2
Electrical connection
6.2
Electrical connection
56 / 83
DANGER
Live components
Fatal electric shock or serious burns
– Work on live components may only be performed by
electricians.
– When performing any work on electrical components, the five
safety rules must be adhered to:
– 1. Disconnect from the electrical supply
– 2. Safeguard to prevent a restart
– 3. Test to ensure a de-energised state
– 4. Earth and short-circuit
– 5. Cover or isolate adjacent
live parts
– The earthing conductor must always be connected before all
other cables.
– Electrical power may only be supplied once the earthing
conductor is connected.
Standard requirements must be observed when connecting the
®
ELDRO
thruster.
Before connecting, check whether the mains voltage and the mains
frequency correspond to the specifications on the type plate.
ELDRO-Assembly-manual-344029-EN.docx