9.1.3
Seals
ELDRO-Assembly-manual-344029-EN.docx
Topping up the operating fluid
Figure 23:
Topping up the operating fluid
1
Filling nozzle
2
Filling nozzle bottom edge
®
Fill the ELDRO
bottom edge. Perform several lifting movements while doing so in
order to prevent air entering the system.
Check the fill level again and top up if required.
Close the filling screw and, if present, the overflow screw tight
(tightening torque: 65 Nm).
Return the ELDRO
(⇒ Assembly chapter).
The ELDRO
®
thruster must be checked for leaks at least once per
year.
thruster with operating fluid up to the filling nozzle
®
thruster to its original installation position
Maintenance
Maintenance tasks
9
9.1
73 / 83