Permissible Installation Positions - EMG ELDRO Ed 12/4 Assembly Manual

6 Assembly and installation
6.1 Assembly
6.1.1

Permissible installation positions

Figure 16: Permissible installation positions
54 / 83
ELDRO ® thrusters may be installed vertically, horizontally and in
angled positions in accordance with the following illustration. The type
plate must always be at the top. This is important, as the
compensation space that is below the type plate must always be at
the top.
If a horizontal installation position with the junction box arranged
on the side or underneath is required due to the space available
for example, the manufacturer must modify the ELDRO
thruster.
The Ed 350 ELDRO
horizontally!
®
thruster type must not be installed
ELDRO-Assembly-manual-344029-EN.docx
®