Table of Contents
Advertisement
10
Disassembly
9.2
Maintenance schedule
10
Disassembly
76 / 83
The following safety regulations must be adhered to before beginning
any work on ELDRO
Ensure that the industrial system is shut down.
De-energise the system.
Safeguard the system to prevent it being switched on again.
Test to ensure a de-energised state.
Cover or isolate adjacent live parts.
WARNING
Opening the ELDRO
Risk of injury due to tensioned c springs.
– Only service partners authorised by the manufacturer are
permitted to dismantle the ELDRO
manufacturer's factory.
CAUTION
Switch-off due to any c springs, brake springs, brake weights
that may be installed or due to other external influences
Risk of crushing due to the lifting rod.
– Before removing the ELDRO
drive must be secured, as the lifting rod retracts
automatically.
®
thrusters:
®
thrusters
®
thrusters, the downstream
ELDRO-Assembly-manual-344029-EN.docx
®
thrusters outside the
Hide quick links:
Advertisement
Table of Contents
