Operating Fluid - EMG ELDRO Ed 12/4 Assembly Manual

9.1.1

Operating fluid

Table 62: Fill quantities for operating fluid
ELDRO
Ed 12/4
Ed 23/5, Ed 23/5.1, Ed 23/5.2, Ed 23/5.5
Ed 25/5
Ed 30/5, Ed 30/5.1, Ed 30/5.2
Ed 50/6, 50/6.1, 50/6.2, 50/6.3, 50/6.5, Ed
50/7
Ed 50/12
Ed 80/6, 80/6.1, 80/6.5, 80/7
Ed 80/12, 80/12.1
Ed 121/6, 121/12, 121/12.1
Ed 121/20
Ed 125/6, 125/7, 125/7 X01
Ed 185/6
ELDRO-Assembly-manual-344029-EN.docx
ELDRO ® thrusters are delivered from the factory with the EMG
operating fluid that depends on the usage conditions and the required
version. Specify the EMG operating fluid type that was filled in on the
type plate.
The EMG operating fluids are tuned to the components used for the
ELDRO ® thrusters and ensure seal compatibility.
NOTE
Observe the safety data sheet.
The same type of EMG operating fluid that is already in the
ELDRO ® thruster must always be used to top up.
Using an incorrect operating fluid can reduce the ELDRO
thruster's performance significantly so that the specified thruster
properties are no longer reached.
®
type
ELDRO ® thrusters are filled with EMG operating fluids HL10 for the
temperature range of between -25 °C and +50 °C when delivered.
Special operating fluids are required for other temperature ranges
(contact the manufacturer).
litres
1.2 Ed 185/16
1.6 Ed 201/6, 201/7, 201/8
1.6 Ed 201/12, 201/12.1, 201/12.5
1.9 Ed 301/6, 301/6.1, 301/7, 301/12,
301/12.1, 301/12.5
4.2 Ed 301/15
5.5 Ed 350/20, 350/20.1, 350/20 X01,
Ed 350/20 X02
4.2 Ed 400/6, 400/7, 400/8, 400/10, 400/12
5.5 Ed 450/8, 450/12
9.4 Ed 450/20
12.1 Ed 500/7, 500/8, 500/10
4.2 Ed 501/8
9.2 Ed 630/8, 630/9, 630/10
Maintenance
Maintenance tasks
®
ELDRO
type
9
9.1
®
litres
9.4
9.5
9.4
9.2
12.1
12.1
9.2
9.2
12.1
12.1
12.1
12
71 / 83