Maintenance; Maintenance Tasks - EMG ELDRO Ed 12/4 Assembly Manual

9

Maintenance

9.1

Maintenance tasks

ELDRO-Assembly-manual-344029-EN.docx
Maintenance work on the ELDRO
when:
 the system is stopped.
 the system has been disconnected from the power supply and
secured to prevent a restart.
 the movements have come to a standstill.
 the ELDRO
®
thruster has cooled off.
Maintenance work may only be performed by instructed specialists
(maintenance staff).
WARNING
Hot surface
Stored residual heat poses a risk of burns if you touch the housing
surface
®
– ELDRO thrusters can reach housing surface temperatures
of up to 100 °C in continuous mode or in switching mode S3.
– The ELDRO ®
maintenance work.
WARNING
Spraying hydraulic oil
Risk of injury (e.g. face and eyes) due to spraying hydraulic oil
– The ELDRO ®
before opening.
– Only turn the filling screw slowly.
– Only specialists are permitted to unscrew and remove the
filling screw.
®
thruster may only be performed
thruster must cool off before starting
thruster must be secured to prevent a restart
Maintenance
Maintenance tasks
9
9.1
69 / 83