Process Media; Modifications; Spare And Wear Parts - EMG ELDRO Ed 12/4 Assembly Manual

2.6

Process media

2.7

Modifications

2.8

Spare and wear parts

ELDRO-Assembly-manual-344029-EN.docx
 The instructions on the manufacturer's material safety data sheets
must be followed.
 Contact with eyes or the skin should be avoided.
 Avoid inhaling vapours or mist.
 Soak up any spilled or leaking process media immediately with a
binding agent and dispose of it properly.
 Keep containers with flammable substances and compressed,
liquefied gases away from sources of heat.
Changes, attachments and modifications to ELDRO
which could impair safety or functions may not be performed without
written approval from the manufacturer.
The use of spare and wear parts from third-party manufacturers may
lead to risks. Only original parts or spare and wearing parts approved
by the manufacturer may be used.
For information regarding replacement thrusters for ELDRO
types that can no longer be supplied, see the "Ordering notes
for replacement thrusters" list.
Safety
Process media 2.6
® components,
®
17 / 83
2