Notes On Operation - EMG ELDRO Ed 12/4 Assembly Manual

7

Notes on operation

ELDRO-Assembly-manual-344029-EN.docx
WARNING
ELDRO ® thrusters can reach housing surface temperatures of
up to 100 °C in continuous mode S1 or in switching mode S3
Risk of burns on the housing surface
– Avoid touching the housing surface during operation.
– Wear safety gloves.
WARNING
Component failure
Risk of injury due to component failure
– There is the risk of individual components breaking when
operating the ELDRO
pose subsequent hazards.
– The operating parameters must be adhered to.
– The ELDRO ® thruster must be installed so that no forces can
be applied at an angle to the working direction.
WARNING
Lifting rod movements
Risk of crushing between surrounding hindrances and the lifting rod
or connected components due to the lifting rod retracting
automatically due to the reset spring of the hydraulic pressure fails
or the power supply is interrupted.
– Switching the motor off returns the lifting rod to the limit
position.
– When assembling, ensure sufficient free space to prevent
crushing or take other measures to safeguard the hazard
point.
– Before removing the ELDRO
such as the brake must be secured to prevent movement.
Notes on operation
Completing assembly
® thruster. The lifting force failure can
® thruster, the connected unit
7
6.4
65 / 83